Lever Padlocks - Brass
A

Click to Enlarge Image ⚓ - Anchor. 3" high. Brass body. Brass shackle.
"The Nick Stone Family Collection" 
7845
Click to Enlarge Image "A-No.1". 3" high x 2 3/8" wide x 1/2" deep. Brass body. Brass shackle. Mfg by: Excelsior Lock Co.
"Courtesy Neil Pylant" 
2105
Click to Enlarge Image "A.C&F.Co.". 4 1/2" high x 2 1/2" wide. Brass body. Brass shackle. Made for: Anthracite Coal & Furnace Co. Mfg by: Miller Lock Co. 4843
Click to Enlarge Image "AEPCo.". Brass body. Brass shackle.  4182
Click to Enlarge Image "AERO". 3" high x 2" wide. Stamped Brass body. Steel shackle. Original key. Mfg by: Corbin Cabinet Lock Co.
"The Ron Sparks Collection"
8004
Click to Enlarge Image "AETNA". 2 1/8" high x 1 9/16" diameter. Brass body. Brass shackle. Post key. "AUTOMOBILE INSURANCE AETNA LIFE INS. COMPANY" is stamped on the obverse of the body. "AUTOMOBILE INSURANCE AETNA LIFE INSURANCE.CO". is stamped on the reverse of the body. "PROTECTION" is stamped on the obverse of the shackle. "B91" is stamped on the obverse of the shackle. "B91" is the key code.
"The Dan Cronin Collection"
1587
Click to Enlarge Image "AJAX 4 LEVER". 2 7/8" high x 2" wide. Brass body. Brass shackle. Mfg by: Corbin Cabinet Lock Co. 4844
Click to Enlarge Image "AMERICAN No 1000". 1 7/8" high x 5/8" deep. Brass body. Brass shackle. 5122
Click to Enlarge Image "AMES SWORD Co.". Brass body. Brass shackle. Mfg by: Ames Sword Co.     Show Video
Body width: 2.480"
Shackle to body height: 3.650"
Body thickness w/ keyhole cover: 0.890"
Body thickness w/o keyhole cover: 0.660"
Total keyway height across keypin: 0.660"

This lock doesn't have a drainhole.
This lock contains a solid lockdog.
This lock contains a thin bottom ward ring concentric with the key pin.
Set screw holding the keyhole cover is threaded and removable.
There's unique stamping (almost unfinished information) on the shackle. No patent date. Small traces of gold electroplating on lock body.
I have every reason to believe that lock was a low production run made just prior to 1882. The absence of a drain hole was a huge oversight.
"The Lauren Arndt Collection"
10175
Click to Enlarge Image "AMES SWORD Co." - "PAT SEPT 19 1882.". 1 3/4" high x 7/8" wide. Brass body. Brass shackle. Over all nickel plate finish. Mfg by: Ames Sword Co. Charles C. Dickerman Patent # 264445. 5124
Click to Enlarge Image "AMES SWORD Co." - "PAT SEPT 19 1882.". 1 3/4" high x 7/8" wide. Brass body. Brass shackle. Over all nickel plate finish. The shackle is marked the same as #5124. Mfg by: Ames Sword Co. Charles C. Dickerman Patent # 264445. 5125
Click to Enlarge Image "AMES SWORD Co." - "PAT SEPT 19 1882.". 4" high x 2 1/2" wide. Brass body. Brass shackle. Mfg by: Ames Sword Co. Charles C. Dickerman Patent # 264445. 3502
Click to Enlarge Image "ANCHOR". 3 1/16" high x 2 1/8" wide. Brass body. Brass shackle.
"The Dave Parmalee Collection"
9631
Click to Enlarge Image "S. ANDREWS - Case Design 1". 2 7/8" high x 2 1/2" wide (Actual: 2.880" high x 2.480" wide). Stamped Brass body. Steel shackle. "S. ANDREWS PERTH AMBOY NJ" is stamped on the obverse of the shackle. "PATENT JULY 8 1856" is stamped on the reverse of the shackle. The clevis was removed. Mfg by: Solomon Andrews. Solomon Andrews Patent #'s 1882 15270 16224.
"The Gene Baxter Collection"
9327
Click to Enlarge Image "S. ANDREWS" - Case Design 2 - Brass Shackle. 4 1/2" high x 2 5/8" wide. Stamped Brass body. Brass shackle. "S. ANDREWS PERTH AMBOY NJ" is stamped on the obverse of the shackle. "PATENT DEC 16 1856" is stamped on the reverse of the shackle. Mfg by: Solomon Andrews. Solomon Andrews Patent #'s 1882 15270 16224.
"The Michael Stuart Collection"
4978
Click to Enlarge Image "S. ANDREWS" - Case Design 2 - Steel Shackle. 4 1/2" high x 2 5/8" wide. Stamped Brass body. Steel shackle. "S. ANDREWS PERTH AMBOY NJ" is stamped on the obverse of the shackle. "PATENT DEC 16 1856" is stamped on the reverse of the shackle. Mfg by: Solomon Andrews. Solomon Andrews Patent #'s 1882 15270 16224. 5126
Click to Enlarge Image "APCO". 3 1/2" high. Brass Brass body. Brass shackle. Made for: Possibly Appalachian Power Co or Alabama Power Co. Mfg by: E. T. Fraim Lock Co. 5127
Click to Enlarge Image "APCO". Brass Brass body. Brass shackle. Made for: Possibly Appalachian Power Co or Alabama Power Co. Mfg by: E. T. Fraim Lock Co.
"The Frank Kidd Collection" 
6213
Click to Enlarge Image "ARCO 4 LEVER". Brass Brass body. Brass shackle. The reverse of the lock is blank. Mfg by: Slaymaker. 5285
Click to Enlarge Image "ATLAS". Brass Brass body. Brass shackle. Mfg by: Corbin Cabinet Lock Co.
"The Ron Sparks Collection" 
9407
Click to Enlarge Image "AUBIN MAKER" - "NETTLEFOLD'S PATENT". Brass body. Brass shackle. Mfg by: Charles Aubin. UK Patent #1315.    More...
"The Michael Stuart Collection" 
9759
Click to Enlarge Image "AZEEMULLAH INDIAN COMPANY VERY NICE No 12". Brass body. Brass shackle. 2 levers. Rotating dust guard. Mfg by: British manufacture. David Waine & Isaac Waine Patent # 380961.
"The Steve Sommers Collection"
5707