Push Key 3-Lever Brass Padlocks (Pancake)

When the reverse of a case is not shown in a picture it is assumed to be plain unless otherwise noted.

When a depth measurement is given the measurement is taken at the edge of the case at a point where the seam is the tightest, thus rendering the smallest measurement. If a bevel is present on the case it is taken before the slope.
 

Click to Enlarge Image Blank - No Pins. 2" diameter. There is a ward where a fourth lever would have been. There is a hole on the obverse of the case just below 12 o'clock. This hole appears to have been made during manufacture. The number 75 is written on the obverse of the case at 3 o'clock in pencil. The lock appears to be a prototype. (3-0).
"The Jon Kolozvary Collection"
1324
Click to Enlarge Image "EAGLE 3 LEVER." - No Pins. 2 1/16" high x 1.642" diameter x .404" deep. Brass Plated. "EAGLE LOCK CO. TERRYVILLE CT. U.S.A." is stamped on the obverse of the shackle. Mfg by: Eagle Lock Co. (3-1). More...
"Courtesy David Heuermann"
432