Pin Tumbler Push Key Padlocks - Large Case
Blank thru D

Click to Enlarge Image Blank - Slaymaker Prototype/Demonstration. 2.795" high x 1.965" wide x .743" deep. Alloy body. Brass shackle. Keyway: Paracentric. 2 Original keys. This lock is considered to be a prototype and was probably used only for demonstration purposes. Although there are no marks identifying it as a slaymaker lock, it operates with a factory cut Slaymaker key. This is the only lock known to exist. Mfg by: Slaymaker. (PK-LA-080#-S1 Pylant Page #44).   More...
"The Edward Wright Collection" 		1713
Click to Enlarge Image Blank - Slaymaker Prototype/Demonstration. Brass body. Brass shackle. Keyway: Paracentric. This lock is considered to be a prototype and was probably used only for demonstration purposes. Although there are no marks identifying it as a slaymaker lock, it operates with a factory cut Slaymaker key. Mfg by: Slaymaker. (PK-LB-080#-S1 Pylant Page #44).    More...
"Courtesy Neil Pylant" 		1739
Click to Enlarge Image Blank - Slaymaker Prototype/Demonstration. Steel body. Brass shackle. Keyway: Paracentric. We do not have a picture of the actual lock. The picture shown is from Neil Pylant's book. This lock is considered to be a prototype and was probably used only for demonstration purposes. Although there are no marks identifying it as a slaymaker lock, it operates with a factory cut Slaymaker key. Mfg by: Slaymaker. (PK-LS-080#-S1 Pylant Page #44).    More...
"Courtesy Neil Pylant" 		9090
Click to Enlarge Image Blank. Steel body. Brass shackle. Keyway: Flat. The reverse of the case is the same as the obverse. Mfg by: Not determined. 4760
Click to Enlarge Image "1840". Steel body. Brass shackle. Keyway: Flat. The reverse of the case is the same as the obverse. "HENRY GILBERT & SON" is embossed on the obverse of the shackle. "HARRISBURG PA." is embossed on the reverse of the shackle. Made for: Henry Gilbert & Son. Mfg by: Slaymaker. (PK-LS-081-S1). 1154
Click to Enlarge Image "200". Brass body. Brass shackle. Keyway: Flat. The reverse of the case is the same as the obverse. "G&D CO." is stamped on the obverse of the shackle. Mfg by: Eagle Lock Co.  (PK-LB-082-S1). 1582
Click to Enlarge Image "AB". Steel body. Brass shackle. Keyway: Flat. The reverse of the case is the same as the obverse. "M.H.H. CO." is stamped on the obverse and reverse of the shackle. Made for: Moore & Handley Hardware Co. Mfg by: Slaymaker.  (PK-LS-001-S1). 1583
Click to Enlarge Image "A-B" - "MHH CO" Shackle - Flat Key. Brass body. Brass shackle. Keyway: Flat. "MHH CO." is stamped on the obverse of the shackle. "BIRMINGHAM" is stamped on the reverse of the shackle. Made for: Moore & Handley Hardware Co. Mfg by: Eagle Lock Co. Patent # 983637. (PK-LB-002-S1). 2279
Click to Enlarge Image "A-B" - "MHH CO" Shackle - Flat Key. Brass body. Brass shackle. Keyway: Flat. "MHH CO." is stamped on the obverse of the shackle. "BIRMINGHAM" is stamped on the reverse of the shackle. Made for: Moore & Handley Hardware Co. Mfg by: Eagle Lock Co. Patent # 983637. 1156
Click to Enlarge Image "A-B" - "MHH CO" Shackle - Paracentric Key. Brass body. Brass shackle. Keyway: Paracentric. "MHH CO." is stamped on the obverse of the shackle. "BIRMINGHAM" is stamped on the reverse of the shackle. Made for: Moore & Handley Hardware Co. Mfg by: Eagle Lock Co. Patent # 983637. 1155
Click to Enlarge Image "A-B" - Plain Shackle. Brass body. Brass shackle. Keyway: Flat. Made for: Moore & Handley Hardware Co. Mfg by: Eagle Lock Co. Patent # 983637. 1157
Click to Enlarge Image "AERO". Steel body. Brass shackle. Keyway: Flat. Mfg by: Yale & Towne Mfg. Co.
"The Edward Wright Collection" 		10191
Click to Enlarge Image "BALDWIN". Steel body. Brass shackle. Keyway: Flat. The reverse of the case is the same as the obverse. "A. BALDWIN & CO. LTD" is stamped on the obverse and reverse of the shackle. Made for: A. Baldwin & Co. LTD. Mfg by: Slaymaker.  (PK-LS-098-S1).
"The Richard Bruno Collection" 		1585
Click to Enlarge Image "BCE". Steel body. Brass shackle. Keyway: Flat. "YALE" is embossed on the obverse of the body. "YALE & TOWNE MFG. CO." is embossed on the obverse of the shackle. "ST. CATHERINES, ONTARIO" is embossed on the reverse of the shackle. Made for: British Columbia Electric. Mfg by: Yale & Towne Mfg. Co.  (PK-LS-094-S1). 1586
Click to Enlarge Image "BD". Steel body. Brass shackle. Keyway: Flat. The reverse of the case is the same as the obverse. Made for: Lewis Brothers Hardware Co. (PK-LS-003-S1). 1135
Click to Enlarge Image "BG BLUEGRASS 44" - Embossed Shackle. Steel body. Brass shackle. Keyway: Flat. "BELKNAP" is embossed on the obverse of the shackle. "LOUISVILLE" is embossed on the reverse of the shackle. "MADE IN USA" is stamped on the obverse of the shackle.  Made for: Belknap Hardware & Mfg. Co. Mfg by: Slaymaker. (PK-LS-004-S1). 1159
Click to Enlarge Image "BG BLUEGRASS 44" - Plain Shackle. Steel body. Brass shackle. Keyway: Flat. The reverse of the case is the same as the obverse. The body is probably made by Slaymaker, but lock does not have Slaymaker code. Shackle and cap are completely different, and diameter of plug is smaller. Made for: Belknap Hardware & Mfg. Co. Mfg by: Slaymaker. (PK-LS-004-S2). 1606
Click to Enlarge Image "BG BLUEGRASS 44" - Plain Flat Shackle. 2.585" high x 2" wide. Steel body. Brass shackle. Keyway: Paracentric. Made for: Belknap Hardware & Mfg. Co.
"The Edward Wright Collection"		 9611
Click to Enlarge Image "BG BLUEGRASS 44" - Plain Round Shackle. 2.585" high x 2" wide. Steel body. Brass shackle. Keyway: Paracentric. Made for: Belknap Hardware & Mfg. Co.
"The Edward Wright Collection"		 10209
Click to Enlarge Image "BINGHAM" - Embossed Shackle. 2 5/8" high x 2" wide. Steel body. Brass shackle. Keyway: Flay. "THE W. BINGHAM, CO." is embossed on the obverse of the shackle. "CLEVELAND, O." is embossed on the reverse of the shackle. Made for: W. Bingham Co. Mfg by: Slaymaker. More... (PK-LS-005-S1). 1089
Click to Enlarge Image "BINGHAM" - Stamped Shackle. Steel body. Brass shackle. Keyway: Flat. "W BINGHAM CO" is stamped on the obverse of the shackle. "MADE IN USA" is stamped on the obverse of the shackle. "CLEVELAND" is Stamped on the reverse of the shackle. Made for: W. Bingham Co. Mfg by: Slaymaker. More... (PK-LS-005-S2). 1158
Click to Enlarge Image "BINGHAM" - Plain Shackle. Steel body. Brass shackle. Keyway: Flat. The body is probably made by Slaymaker, but lock does not have Slaymaker code. Shackle and cap are completely different, and diameter of plug is smaller. Made for: W. Bingham Co. Mfg by: Slaymaker. More... (PK-LS-005-S3). 1607
Click to Enlarge Image "BLUE GRASS BG 44" - No "MADE IN USA". Steel body. Brass shackle. Flat key. "BELKNAP-LOUISVILLE" is stamped on the obverse of the shackle. "BLUE GRASS" is stamped on the reverse of the shackle. "MADE IN USA" is not stamped on the reverse of the shackle. Made for: Belknap Hardware & Mfg. Co. Mfg by: Slaymaker. (PK-LS-006-S1). 1309
Click to Enlarge Image "BLUE GRASS BG 44" - "MADE IN USA". Steel body. Brass shackle. Flat key. "BELKNAP-LOUISVILLE" is stamped on the obverse of the shackle. "BLUE GRASS" is stamped on the reverse of the shackle. "MADE IN USA" is stamped on the reverse of the shackle. Made for: Belknap Hardware & Mfg. Co. Mfg by: Slaymaker. (PK-LS-006-S1). 1160
Click to Enlarge Image "BLUE GRASS BG 44" - "MADE IN USA" - Clevis. Steel body. Brass shackle. Flat key. "BELKNAP-LOUISVILLE" is stamped on the obverse of the shackle. "BLUE GRASS" is stamped on the reverse of the shackle. "MADE IN USA" is stamped on the reverse of the shackle. Made for: Belknap Hardware & Mfg. Co. Mfg by: Slaymaker. (PK-LS-006-S1C). 1310
Click to Enlarge Image "BRAMBLE LOCK COMPANY". Steel body. Steel shackle. Keyway: Flat. Mfg by: Bramble Lock Co. Patent # 418884. 
"The Richard Bruno Collection" 		6328
Click to Enlarge Image "BRAMBLE LOCK COMPANY TERREHAUTE". Steel body. Brass shackle. Keyway: Flat. Mfg by: Bramble Lock Co.  Patent # 418884. 
"The Richard Bruno Collection" 		1185
Click to Enlarge Image "BRAMBLE LOCK COMPANY TERREHAUTE". 1 13/16" wide. Steel body. Steel shackle. Keyway: Flat. The reverse of the case and shackle are plain. Mfg by: Bramble Lock Co.  Patent # 418884.  (PK-LS-007-S1).
"Courtesy Neil Pylant"  		1608
Click to Enlarge Image "BRAMBLE LOCK. COMPANY. TERREHAUTE.". 1 13/16" wide. Steel body. Brass shackle. Keyway: Flat. The reverse of the case and shackle are plain. Mfg by: Bramble Lock Co.  Patent # 418884.  (PK-LS-095-S1). 1609
Click to Enlarge Image "BUHL" - Embossed Shackle. Steel body. Brass shackle. Keyway: Flat. Made for: Buhl Sons Co. Mfg by: E. T. Fraim Lock Co. (PK-LS-008-S1). 1168
Click to Enlarge Image "BUHL" - Stamped Shackle - No "MADE IN USA". Steel body. Brass shackle. Keyway: Flat. The reverse of the case is the same as the obverse. "BUHL SONS CO." is stamped on the obverse of the shackle. "MADE IN USA" is not stamped on the obverse of the shackle. "DETROIT MICH." is stamped on the reverse of the shackle. Made for: Buhl Sons Co. Mfg by: Slaymaker. (PK-LS-009-S1). 1169
Click to Enlarge Image "CANADA CUSTOMS". Steel body. Brass shackle. Keyway: Flat. "YALE & Towne MFG. CO." is embossed on the obverse of the shackle. "MADE IN CANADA" is embossed on the reverse of the shackle. Made for: Canada Customs. Mfg by: Yale & Towne Mfg. Co. Canada. (PK-LS-010-S1). 1610
Click to Enlarge Image "CANADA CUSTOMS". Steel body. Brass shackle. Keyway: Flat. "ST. CATHARINES ONTARIO" is embossed on the obverse of the shackle. "CANADIAN YALE & TOWNE LTD." is embossed on the reverse of the shackle. Made for: Canada Customs. Mfg by: Yale & Towne Mfg. Co. 1136
Click to Enlarge Image "CANADA EXCISE". Steel body. Brass shackle. Keyway: Flat. "YALE & Towne MFG. CO." is embossed on the obverse of the shackle. "MADE IN CANADA" is embossed on the reverse of the shackle. Made for: Canada Excise. Mfg by: Yale & Towne Mfg. Co. Canada. (PK-LS-011-S1). 1611
Click to Enlarge Image "CES". Steel body. Brass shackle. Keyway: Paracentric. (PK-LS-012-S1). 1446
Click to Enlarge Image "C.N.R". Steel body. Brass shackle. Keyway: Flat. Made for: Canadian National Railway Co.
"The Edward Wright Collection" 		10206
Click to Enlarge Image "C.N.R". Steel body. Brass shackle. Keyway: Flat. Made for: Canadian National Railway Co. Mfg by: E. T. Fraim Lock Co. (PK-LS-014-S1). 1612
Click to Enlarge Image "C.N.R". Steel body. Brass shackle. Keyway: Flat. "THE E.T. FRAIM LOCK CO." is embossed on the obverse of the shackle. Made for: Canadian National Railway Co. Mfg by: E. T. Fraim Lock Co. (PK-LS-014-S2). 1736
Click to Enlarge Image "C.N.R". Steel body. Brass shackle. Keyway: Not recorded. "CORBIN" is embossed on the obverse of the shackle. "NEW BRITAIN CT. U.S.A." is embossed on the reverse of the shackle. Made for: Canadian National Railway Co. Mfg by: Corbin Cabinet Lock Co.  (PK-LS-016-S1). 1614
Click to Enlarge Image "CNR". Steel body. Brass shackle. Keyway: Flat. "UNION" is stamped on the obverse of the shackle. "BRITISH MADE" is stamped on the reverse of the shackle. Made for: Canadian National Railway Co. More...  (PK-LS-015-S1). 1613
Click to Enlarge Image "CNR". Steel body. Brass shackle. Keyway: Flat. "YALE & Towne MFG. CO." is embossed on the obverse of the shackle. "MADE IN CANADA" is embossed on the reverse of the shackle. Made for: Canadian National Railway Co. Mfg by: Yale & Towne Mfg. Co. Canada. Some locks have a steel cap. Some shackles are embossed with "YALE & Towne MFG. CO." on the obverse of the shackle and are stamped with "MADE IN CANADA" on the reverse of the shackle. (PK-LS-013-S1). 1171
Click to Enlarge Image "CNR". Steel body. Brass shackle. Keyway: Flat. Both sides of the shackle are plain. Made for: Canadian National Railway Co. Mfg by: Yale & Towne Mfg. Co. Canada. Some locks have a steel cap.  (PK-LS-013-S2). 1737
Click to Enlarge Image "CORBIN". Brass body. Brass shackle. Keyway: Flat. The reverse of the case is the same as the obverse. "CORBIN" is embossed on the obverse of the shackle. "NEW BRITAIN CT. U.S.A." is embossed on the reverse of the shackle. "MADE IN U.S.A." is stamped on the obverse of the shackle. Mfg by: Corbin Cabinet Lock Co.  (PK-LB-017-S1). 1615
Click to Enlarge Image "CORBIN". Steel body. Brass shackle. Keyway: Flat. The reverse of the case is the same as the obverse. "CORBIN" is embossed on the obverse of the shackle. "NEW BRITAIN CT. U.S.A." is embossed on the reverse of the shackle. Mfg by: Corbin Cabinet Lock Co.  (PK-LS-017-S1). 1616
Click to Enlarge Image "CORBIN". Steel body. Brass shackle. Keyway: Flat. The reverse of the case is the same as the obverse. "CORBIN" is embossed on the obverse of the shackle. "NEW BRITAIN CT. U.S.A." is embossed on the reverse of the shackle. Mfg by: Corbin Cabinet Lock Co.  (PK-LS-017-S1C). 1617
Click to Enlarge Image "CORBIN". Steel body. Brass shackle. Keyway: Flat with ball bearings. The reverse of the case is the same as the obverse. "CORBIN" is embossed on the obverse of the shackle. "NEW BRITAIN CT. U.S.A." is embossed on the reverse of the shackle. Mfg by: Corbin Cabinet Lock Co.  (PK-LS-017-S1-F). 1618
Click to Enlarge Image "CORBIN". Steel body. Brass shackle. Keyway: Paracentric. The reverse of the case is the same as the obverse. "CORBIN" is embossed on the obverse of the shackle. "NEW BRITAIN CT. U.S.A." is embossed on the reverse of the shackle. Mfg by: Corbin Cabinet Lock Co.  (PK-LS-017-S1-P). 1619
Click to Enlarge Image "CORBIN". Steel body. Brass shackle. Keyway: Flat. The reverse of the case is the same as the obverse. Mfg by: Corbin Cabinet Lock Co.  (PK-LS-017-S2). 1620
Click to Enlarge Image "CORBIN". 2 5/8" high x 2" wide. Steel body. Brass shackle. Keyway: Flat with ball bearings.  "CORBIN" is embossed on the obverse of the body. "CORBIN" is embossed on the obverse of the shackle. "NEW BRITAIN CT. U.S.A." is embossed on the reverse of the shackle. Mfg by: Corbin Cabinet Lock Co.   (PK-LS-018-S1). 1090
Click to Enlarge Image "CORBIN". Steel body. Brass shackle. Keyway: Flat with ball bearings.  Flat plain shackle. Mfg by: Corbin Cabinet Lock Co.   (PK-LS-018-S2). 1621
Click to Enlarge Image "CORBIN". Steel body. Brass shackle. Keyway: Flat with ball bearings.  Flat shackle. "P.R. CO." is stamped on the obverse of the shackle. Mfg by: Corbin Cabinet Lock Co.   (PK-LS-018-S2a). 1622
Click to Enlarge Image "CORBIN" - "H.V. R.R. CO.". Steel body. Brass shackle. Keyway: Flat.  "H.V.R.R.CO." is stamped on the obverse of the shackle. Made for: Hocking Valley Railroad Co. Mfg by: Corbin Cabinet Lock Co.
"The Frank Kidd Collection"  		1754
Click to Enlarge Image "CPR". Steel body. Brass shackle. Keyway: Flat. "YALE & TOWNE MFG CO" is embossed on the obverse of the shackle. "MADE IN CANADA" is embossed on the reverse of the shackle. Made for: Canadian Pacific Railroad Co. Mfg by: Yale & Towne Mfg. Co. Canada. (PK-LS-019-S1). 1175
Click to Enlarge Image "CPR". Steel body. Brass shackle. Keyway: Flat. "YALE & TOWNE MFG CO" is embossed on the obverse of the shackle. "STAMFORD CONN. U.S.A." is embossed on the reverse of the shackle.  Made for: Canadian Pacific Railroad Co. Mfg by: Yale & Towne Mfg. Co. (PK-LS-019-S2). 1623
Click to Enlarge Image "CPR". Steel body. Brass shackle. Keyway: Flat. "CANADIAN YALE & TOWNE LTD" is embossed on the obverse of the shackle. "ST. CATHARINES. ONTARIO" is embossed on the reverse of the shackle.  Made for: Canadian Pacific Railroad Co. Mfg by: Yale & Towne Mfg. Co. Canada. (PK-LS-019-S3). 1624
Click to Enlarge Image "CPR T H". Steel body. Brass shackle. Keyway: Flat. "YALE" is embossed on the obverse of the body. "YALE & TOWNE MFG. CO." is embossed on the obverse of the shackle. "MADE IN CANADA" is embossed on the reverse of the shackle.  Made for: Canadian Pacific Railroad Co. (Tool House). Mfg by: Yale & Towne Mfg. Co. Canada. (PK-LS-020-S1). 1625
Click to Enlarge Image "CPR T H". Steel body. Brass shackle. Keyway: Flat. "YALE" is embossed on the obverse of the body. "YALE & TOWNE MFG. CO." is embossed on the obverse of the shackle. "MADE IN CANADA" is stamped on the obverse of the shackle.  The reverse of the shackle is plain. Made for: Canadian Pacific Railroad Co. (Tool House). Mfg by: Yale & Towne Mfg. Co. Canada. (PK-LS-020-S2). 1626
Click to Enlarge Image "C.P.R. NEWS". Steel body. Brass shackle. Keyway: Flat. Mfg by: Yale & Towne Mfg. Co.
"The Richard Bruno Collection"  		1142
Click to Enlarge Image "CRONING". Steel body. Brass shackle. Mfg by: Crown Lock Co.  US Patent #1677432. US Patent #1797075. 1633
Click to Enlarge Image "DAMM". Steel body. Brass shackle. Keyway: Flat. "DAMM & LADWIG·VELBERT·RICHLD." is embossed on the obverse of the shackle. The reverse of the shackle is plain. Mfg by: (Damm & Ladwig). (Damm & Ladwig was a lock manufacture that was purchased by Yale in the 1940's or 1950's.). (PK-LS-021-S1).
<<<This Padlock Requires Further Research>>> 		1627
Click to Enlarge Image "DAMM". Steel body. Brass shackle. Keyway: Flat. "DAMM & LADWIG·VELBERT·RICHLD." is stamped on the obverse of the shackle. A Fox standing up against a Padlock is stamped on the reverse of the shackle. Mfg by: (Damm & Ladwig). (Damm & Ladwig was a lock manufacture that was purchased by Yale in the 1940's or 1950's.).
<<<This Padlock Requires Further Research>>> 		1628
Click to Enlarge Image "DAMM". Brass body. Brass shackle. Keyway: Flat. "DAMM & LADWIG·VELBERT·RICHLD." is embossed on the obverse of the shackle. The reverse of the shackle is plain. Mfg by: (Damm & Ladwig). (Damm & Ladwig was a lock manufacture that was purchased by Yale in the 1940's or 1950's.). (PK-LB-099-S1).
<<<This Padlock Requires Further Research>>> 		1629
Click to Enlarge Image "DIDAPA". Steel body. Brass shackle. Keyway: Flat. "D.D.H. CO." is stamped on the obverse and reverse of the shackle. Mfg by: Slaymaker. (PK-LS-022-S1).
<<<This Padlock Requires Further Research>>> 		1630
Click to Enlarge Image "D.M.&I.R.". Steel body. Brass shackle. Keyway: Flat. The reverse of the case is the same as the obverse. "SARGENT" is embossed on the obverse of the shackle. "NEW HAVEN, CT., U.S.A." is embossed on the reverse of the shackle. Made for: Duluth Missabe and Iron Range Railway Co. Mfg by: Sargent. (PK-LS-024-S1). 1631
Click to Enlarge Image "D.M.&N.". Steel body. Brass shackle. Keyway: Flat. The reverse of the case is the same as the obverse. "SARGENT" is embossed on the obverse of the shackle. "NEW HAVEN, CT., U.S.A." is embossed on the reverse of the shackle. Made for: Duluth Missabe and Northern Railway Co. Mfg by: Sargent. (PK-LS-023-S1).
"The Frank Kidd Collection" 		1632